A decade of industrial pollution data (2024)

Access to industrial pollution data

The European Pollutant Release and Transfer Register (E-PRTR) gives Europeans access to industrial pollution data. This year marks a full decade of data reported to the register and there are many ways in which these data can be used:

1. Pollution near you: the E-PRTR web service enables users to zoom in on the area in which they live or spend time, in order to discover what kind of pollution occurs there.
2. Top polluters: by downloading E-PRTR data, users can identify the top polluters in Europe, past and present. The EEA recently made the results of an assessment of pollutant releases available, the data from which are now being used by environmental groups to this end.
3. Impacts on health and the environment: pollution exerts pressure on the environment and health, which leads to various impacts. E-PRTR data can be combined with other knowledge to provide approximate impacts, as in for example, the EEA report on the cost of industrial air pollution. In 2012 alone, the damages from key air pollutant releases by industry amounted to at least EUR 59 billion — more than the gross domestic product of Luxembourg for the same year. The report helped to create an understanding that three quarters of the damages were associated with just under 600 individual facilities and that energy supply was responsible for the majority of them. A Swedish research team (Sörme et al, 2016 and Nordborg et al, 2017) also used E-PRTR data, combined with USEtox toxicity factors, to calculate the potential environmental impacts of chemicals released. The research shows that the Swedish pulp and paper industry has the largest potential impact on Sweden’s environment, followed by metals manufacturing. A recent EEA briefing on pressures from emissions of industrial heavy metals and an EEA report on industrial waste water treatment have incorporated this toxicity-based approach.

Industrial pollutant emissions are going down

The EEA regularly assesses trends in industrial pollution in Europe based on E-PRTR and other data. These show that industrial pollution has decreased over the past decade for emissions to both air and water. Emission reductions can often be linked to requirements to operators set out in EU environmental legislation, such as the Industrial Emissions Directive. This directive aims for an ambitious level of protection and, in particular, to reduce emissions through the continuous uptake of the so-called best available techniques (BAT). Other EU legislation sets more concrete air emission reduction targets (e.g. the National Emission Ceilings Directive) or a standard for good environmental water quality that needs to be met (e.g. the Water Framework Directive).

The E-PRTR is a widely recognised tool, used to assess pollution trends and evaluate the impact of EU environmental legislation. A new OECD report on measuring BAT policy effectiveness around the world highlights the usefulness of PRTR data in this context. It includes a chapter on the EU that explains how the European Commission, for example, uses E-PRTR data to assess policy impacts.

The iron and steel sector lends itself as an example in this context. It is a major industrial contributor to greenhouse gas (GHG) emissions and alone accounts for 2.7 % (in CO₂ equivalent) of total GHG emissions from 33 EEA member countries (EEA-33; see the EEA GHG data viewer). The sector also contributes significantly to emissions of air pollutants, including heavy metals (around of 15-25 % in 2016 depending on the heavy metal) in the EEA-33 (see the EEA air pollutant emissions data viewer).

Mercury is of particular concern for environmental and human health. It accumulates in fish and thus finds its way into our food chain. Once inside our bodies it affects the brain (particularly the mental development of children) and contributes to cardiovascular diseases, among others. Mercury is now banned in Europe for most of its former uses and remaining emissions are associated with the burning of solid fuels or processing of metals. The majority of mercury still deposited in Europe is linked to emissions from outside Europe and the recent UN Minamata Convention addresses this global problem (see EEA Mercury report).

The E-PRTR can be used to track ongoing industrial releases of mercury including from the iron and steel manufacturing sector (11 % of total EEA-33 mercury emissions to air in 2016).

Mercury emissions per unit of steel produced in the EEA-33 were 36 % lower in 2017 than in 2008 (earliest available European Commission PRODCOM data on steel production; see Figure 1). New European emission levels and best practices for various iron and steel manufacturing processes were established in 2012 and aim to reduce mercury emissions (EIPPCB, 2012), among others. Emission levels — including for mercury — were required to be implemented by 2016, which likely had an impact on emission reductions (see this recent ex-post cost-benefit assessment of the sector commissioned by the European Commission).

Figure 1. Mercury emissions per unit of steel production and number of facilities reporting to the E-PRTR in the EEA-33 countries

The E-PRTR is about more than industrial pollution

The E-PRTR is also instrumental in creating new knowledge around pollution that is relevant to the environment. In combination with other datasets, E-PRTR data can provide a new perspective on a variety of issues and can help pose new questions that guide future research, and influence EU and national policy development.

A closer look at the waste management sector, for example, reveals interesting trends around its emissions of greenhouse gases. This sector is responsible for over a quarter of emissions of the potent greenhouse gas methane in the EEA-33 (see the EEA GHG data viewer).

In order to reduce the contribution to climate change from landfills, the EU Landfill Directive (1999/31/EC) requires both a reduction in landfilling of biodegradable municipal waste (see e.g. EEA, 2009), as well as the collection of any methane still forming in them as a result of biodegradation. E-PRTR data show that methane emissions have steadily decreased since data collection began in 2007.

Incineration is increasingly important as an alternative to landfilling for the treatment of residual waste. In the 10 years up to 2016, the amount of waste incinerated increased by 30 % (Eurostat, 2019a), and the amount of heat and energy recovered from waste increased by more than three quarters (Eurostat 2019b). E-PRTR data, however, also reveal that CO₂ emissions from incinerators have increased by about half since 2010, which is disproportionately more than the 30 % increase in the amount of waste incinerated.

The CO₂ emitted per kilogramme of waste incinerated depends on the composition of the waste. Eurostat statistics indicate that the majority of the increase in waste incinerated consists of residual household waste and sorting residue (waste collected separately but unfit for recycling; Eurostat 2019a). Both of these waste types will produce significant amounts of CO₂ when burnt. More data on the composition of waste are needed to fully explain the disproportionate increase in CO₂ emissions from incineration.

The role of the manufacturing, energy supply and waste management industries with respect to waste in Europe is explored in detail in the new EEA industrial waste indicator.

Figure 2. CH₄ emissions from landfills and CO₂ emissions from waste incinerators in the EEA-33 countries